How To Lay Laminate Under Kitchen Units

May 28, 2022
By admin
Filed Under Kitchen Cabinets
No Comments

How To Lay Laminate Under Kitchen Units

Laying laminate flooring under kitchen units can be a daunting task, but with the right preparation and materials, it can be a rewarding experience. Here is a step-by-step guide to help you achieve a professional-looking finish:

1. Preparation

Before you begin, thoroughly clean the subfloor to remove any dirt or debris. Next, measure the area where you will be installing the laminate and cut the planks to size. Ensure that you leave a small gap (approximately 6mm) around the edges to allow for expansion.

2. Laying the Underlayment

Lay the underlayment over the subfloor, ensuring that all joints are taped together. The underlayment will help to reduce noise and provide a smooth surface for the laminate.

3. Starting Row

Begin laying the laminate in a corner of the room. Place a spacer block against the wall and lay the first plank parallel to it. Ensure that the tongue of the plank faces away from the wall. Tap the next plank into place and continue the process until you reach the end of the row.

4. Installing the Remaining Rows

Lay the remaining rows by tapping the planks into place. Stagger the joints between the rows to create a more durable floor. Use a tapping block and a hammer to gently tap the planks together. Avoid hitting the planks directly with the hammer, as this could damage them.

5. Trimming Around Kitchen Units

When you reach the kitchen units, measure and cut the planks to fit around them. Use a jigsaw or a utility knife to make precise cuts. Ensure that you leave a small gap around the units to allow for expansion.

6. Finishing Touches

Once all the planks have been laid, install the skirting boards around the edges of the floor. This will help to conceal any gaps and give the floor a finished look. Finally, remove the spacer blocks and install transition strips at the doorways or other areas where the laminate meets a different flooring type.

Tips for Success

- Use a sharp blade to cut the laminate planks and underlayment. - Ensure that the subfloor is level before laying the laminate. - Leave a small gap (approximately 6mm) around the edges of the floor to allow for expansion. - Stagger the joints between the rows to create a more durable floor.