How To Put Hinges On Kitchen Cabinets

February 13, 2020
By admin
Filed Under Kitchen Cabinets
No Comments

How to Put Hinges on Kitchen Cabinets

Installing hinges on kitchen cabinets is an essential task for any DIY enthusiast or homeowner. By following these step-by-step instructions, you can ensure that your cabinet doors open and close smoothly, adding both functionality and aesthetic appeal to your kitchen.

1. Gather the Necessary Tools and Materials

* Drill * Screwdriver * Hammer * Measuring tape * Pencil * Hinges (one pair per door) * Mounting screws * Hinges mounting plate (if required)

2. Position the Hinges on the Cabinet Door

* Measure and mark the location of the hinges on the inside edge of the door, 1-1/2 inches from the top and bottom. * Place the hinges on the marks, aligning the base of the hinge with the edge of the door. * Use a pencil to trace the outline of the hinge onto the door.

3. Install the Mounting Plate (optional)

* If your hinges require a mounting plate, place it on the door, aligning the holes with the hinge outline. * Secure the mounting plate with screws.

4. Drill Pilot Holes

* Using a drill, create small pilot holes at each screw hole location on the hinge outline. This will prevent the wood from splitting when the screws are driven in.

5. Screw in the Hinges

* Place the hinges over the pilot holes and drive in the mounting screws using a screwdriver. * Tighten the screws securely, but avoid overtightening.

6. Position and Mark the Hinges on the Cabinet

* Close the cabinet door and mark the location of the hinges on the inside edge of the cabinet. * Measure 1/8 inch down from the top and bottom of the door and mark these points. * Align the hinges with the marks and trace their outline onto the cabinet.

7. Install the Hinges on the Cabinet

* Drill pilot holes at each screw hole location on the hinge outline. * Place the hinges over the pilot holes and drive in the mounting screws. * Tighten the screws securely.

8. Adjust the Hinges

* Once the hinges are installed, open and close the door to check the fit. * If necessary, adjust the hinges using a screwdriver to ensure smooth operation. * You can adjust the hinge depth to prevent the door from hitting the cabinet frame. You can also adjust the hinge side-to-side to center the door.

9. Final Touches

* Check the alignment of the cabinet doors and make any necessary adjustments. * Install cabinet pulls or knobs for easy opening. * Clean up any debris and enjoy your newly installed cabinet hinges!