Adjusting Kitchen Corner Cabinet Hinges

November 6, 2018
By admin
Filed Under Kitchen Cabinets
No Comments

Adjusting Kitchen Corner Cabinet Hinges: A Step-by-Step Guide

Kitchen corner cabinets can be a challenge to adjust, but with the right tools and a little know-how, you can do it yourself in a few minutes. Here are the steps you need to follow:

Step 1: Gather Your Tools

Before you start, you'll need to gather a few tools:

A Phillips head screwdriver

A flat head screwdriver

A tape measure

A pencil

A level

Step 2: Open the Cabinet Door

Open the cabinet door to expose the hinges. There will be two hinges on each door, one at the top and one at the bottom.

Step 3: Locate the Adjustment Screws

On each hinge, there are two adjustment screws. The horizontal screw adjusts the door's left-to-right position, and the vertical screw adjusts the door's up-and-down position.

Step 4: Adjust the Horizontal Screw

Use the Phillips head screwdriver to turn the horizontal screw clockwise to move the door to the right or counterclockwise to move the door to the left.

Step 5: Adjust the Vertical Screw

Use the Phillips head screwdriver to turn the vertical screw clockwise to move the door up or counterclockwise to move the door down.

Step 6: Check the Alignment

Once you've made the adjustments, close the cabinet door and check the alignment. The door should fit evenly in the cabinet opening and should not rub against the cabinet frame.

Step 7: Make Fine Adjustments

If the door is still not aligned properly, you can make fine adjustments by turning the adjustment screws in small increments. Be patient and take your time until the door is perfectly aligned.

Step 8: Tighten the Screws

Once you're satisfied with the alignment, tighten the adjustment screws with the Phillips head screwdriver.

Step 9: Test the Door

Open and close the cabinet door several times to make sure that it's working properly. The door should open and close smoothly and should not make any noise.