How To Wrap Kitchen Sides

May 12, 2021
By admin
Filed Under Kitchen Cabinets
No Comments

How to Wrap Kitchen Sides: A Step-by-Step Guide

Wrapping kitchen sides is an effective way to protect them from scratches, heat, and moisture, while also enhancing the overall aesthetics of your kitchen. Whether you're updating your existing cabinets or installing new ones, wrapping the sides can give your kitchen a fresh and polished look.

In this comprehensive guide, we'll provide you with a step-by-step tutorial on how to wrap kitchen sides, ensuring a professional and durable finish. From gathering the necessary materials to applying the finishing touches, we'll cover everything you need to know.

Materials You'll Need:

Kitchen side panels
Contact cement
Rags or brushes
Measuring tape
Razor blade or sharp knife
Laminate roller
Sandpaper (optional)

Step-by-Step Instructions:

1. Prepare the Kitchen Sides

Remove any hardware, such as hinges or handles, from the kitchen sides. Clean the surfaces thoroughly with a damp cloth and allow them to dry completely. If necessary, lightly sand the surface to smooth out any imperfections.

2. Measure and Cut the Wrap

Measure the length and height of the kitchen side panel. Add 2-3 inches to each measurement to allow for overhang and a clean edge. Using a razor blade or sharp knife, cut the contact cement to size.

3. Apply Contact Cement

Apply a thin, even layer of contact cement to the back of the wrap and the surface of the kitchen side panel. Use a rag or brush to work the cement into the surface. Allow the cement to dry for 5-10 minutes.

4. Position and Adhere the Wrap

Carefully align the wrap with the edge of the kitchen side panel. Slowly press the wrap onto the surface, starting from one end and working your way to the other. Use a laminate roller to apply pressure and ensure a secure bond.

5. Trim the Excess

Once the wrap is in place, use a razor blade or sharp knife to trim any excess material around the edges. Be careful not to cut into the kitchen side panel itself.

6. Apply the Finish

Buff the wrapped surface with a clean cloth or sponge to remove any glue residue. If desired, you can apply a clear sealant to protect the wrap from wear and tear.