How To Replace Kitchen Cabinet Base Molding

June 27, 2018
By admin
Filed Under Kitchen Cabinets
No Comments

How to Replace Kitchen Cabinet Base Molding

Replacing kitchen cabinet base molding is a relatively simple task that can be completed in a few hours. By following these steps, you can give your kitchen a fresh, updated look.

Tools and Materials

New base molding
Measuring tape
Miter saw or coping saw
Caulk gun
Caulk
Hammer
Nails

Steps

Remove the old base molding. Use a pry bar to gently pry the old base molding away from the cabinet.
Measure and cut the new base molding. Measure the length of the cabinet and cut the new base molding to the same length. Use a miter saw or coping saw to cut the molding at a 45-degree angle at each end.
Apply caulk to the back of the new base molding. This will help to seal the gap between the molding and the cabinet.
Nail the new base molding in place. Use a hammer and nails to nail the new base molding to the cabinet. Make sure to countersink the nails so that they are flush with the surface of the molding.

Tips

When cutting the new base molding, be sure to measure twice and cut once.
If you are using a coping saw, be sure to practice on a scrap piece of molding before you start cutting the actual molding.
When nailing the new base molding in place, be sure to use a nail set to countersink the nails.

Conclusion

Replacing kitchen cabinet base molding is a simple task that can be completed in a few hours. By following these steps, you can give your kitchen a fresh, updated look.