How To Remove Kitchen Cabinet Hinges

June 30, 2019
By admin
Filed Under Kitchen Cabinets
No Comments

How to Remove Kitchen Cabinet Hinges

Kitchen cabinet hinges are essential for the proper functioning of your cabinets. They allow the doors to open and close smoothly and quietly. However, over time, hinges can become loose or damaged, which can cause the doors to sag or even come off. If you need to remove kitchen cabinet hinges, follow these steps.

Safety First

Before you begin, safety first! Make sure to turn off the power to the kitchen at the circuit breaker. This will prevent you from getting shocked if you accidentally touch any electrical wires.

Gather Your Tools

You will need the following tools to remove kitchen cabinet hinges:

A screwdriver
A hammer
A putty knife
A pair of pliers

Remove the Door

First, you need to remove the door from the cabinet. To do this, open the door and locate the hinges. There will be two or three hinges on each side of the door.

Using the screwdriver, loosen the screws that hold the hinges in place. Be careful not to remove the screws completely, as you will need to reuse them later.

Once the screws are loose, use the hammer to gently tap the hinges until they come loose from the door.

Remove the Hinge Plates

Once the hinges are loose, you need to remove the hinge plates from the cabinet. To do this, use the putty knife to pry the hinge plates off the cabinet. Be careful not to damage the cabinet or the hinge plates.

Remove the Hinge Pins

Once the hinge plates are removed, you need to remove the hinge pins. To do this, use the pliers to grasp the hinge pin and pull it out of the hinge.

Reassemble the Hinges

Once you have removed all of the hinges, you can reassemble them. To do this, insert the hinge pins into the new hinge plates. Then, place the hinge plates on the cabinet and secure them with the screws.

Reattach the Door

Once the hinges are reassembled, you can reattach the door to the cabinet. To do this, lift the door into place and align the hinges with the hinge plates. Then, tighten the screws to secure the door.

Test the Hinges

Once the door is reattached, test the hinges to make sure they are working properly. Open and close the door several times to make sure it moves smoothly and quietly.

If the hinges are not working properly, you may need to adjust them. To do this, use the screwdriver to loosen or tighten the screws on the hinges until they are working properly.