How To Put Hinge Holes In Kitchen Doors

May 19, 2022
By admin
Filed Under Kitchen Cabinets
No Comments

How to Put Hinge Holes in Kitchen Doors

Installing kitchen cabinets can be a daunting task, but with the right tools and know-how, it can be done. One of the most important steps is to put the hinge holes in the doors. This can be done by hand or with a drill press. If you are doing it by hand, you will need a sharp chisel and a hammer. If you are using a drill press, you will need a Forstner bit.

Here are the steps on how to put hinge holes in kitchen doors:

1. Mark the location of the hinges. The first step is to mark the location of the hinges on the door. The hinges should be placed evenly spaced along the edge of the door. The top hinge should be placed about 6 inches from the top of the door, and the bottom hinge should be placed about 6 inches from the bottom of the door. If your kitchen cabinet doors are too small to measure 6 inches from the top and bottom, then you can put your hinges 3 inches from the top and bottom. You can use a tape measure and a pencil to mark the location of the hinges.

2. Drill the pilot holes. Once you have marked the location of the hinges, you need to drill the pilot holes. The pilot holes should be slightly smaller than the diameter of the hinge screws. If you are drilling the holes by hand, use a sharp chisel and a hammer. If you are using a drill press, use a Forstner bit.

3. Chisel out the mortise. Once you have drilled the pilot holes, you need to chisel out the mortise. The mortise is the recess in the door where the hinge will be mounted. Use a sharp chisel and a hammer to chisel out the mortise. The mortise should be slightly larger than the hinge.

4. Install the hinges. Once you have chiseled out the mortise, you can install the hinges. Insert the hinges into the mortise and secure them with the screws.

5. Test the hinges. Once the hinges are installed, test them to make sure they are working properly. Open and close the door several times to make sure the hinges are moving smoothly.

Putting hinge holes in kitchen doors is not a difficult task, but it does require some precision. By following these steps, you can ensure that the hinges are installed correctly and that the door will open and close smoothly.