How To Install Knobs And Handles On Kitchen Cabinets

May 11, 2021
By admin
Filed Under Kitchen Cabinets
No Comments

How to Install Knobs and Handles on Kitchen Cabinets

Replacing the knobs and handles on your kitchen cabinets is a relatively simple and inexpensive way to update the look of your kitchen. It's a project that can be completed in a few hours, and it doesn't require any special tools or skills.

Here are the steps on how to install knobs and handles on kitchen cabinets:

1. Remove the old knobs or handles.

To remove the old knobs or handles, simply unscrew them from the cabinet doors. If the knobs or handles are stuck, you can use a pair of pliers to gently pry them off.

2. Mark the location of the new knobs or handles.

Once the old knobs or handles are removed, you need to mark the location of the new ones. To do this, measure the distance between the center of the cabinet door and the edge of the door. Then, mark this distance on the door, using a pencil or a piece of tape.

3. Drill pilot holes.

Before you install the new knobs or handles, you need to drill pilot holes. This will help to prevent the screws from splitting the wood. To drill pilot holes, use a drill bit that is slightly smaller than the diameter of the screws that you will be using.

4. Install the new knobs or handles.

Once the pilot holes are drilled, you can install the new knobs or handles. To do this, simply screw the knobs or handles into the pilot holes. Be sure to tighten the screws securely, but do not overtighten them.

5. Enjoy your new kitchen!

Once the new knobs or handles are installed, you can enjoy your updated kitchen. Replacing the knobs and handles is a simple and inexpensive way to give your kitchen a whole new look.

Here are some additional tips for installing knobs and handles on kitchen cabinets:

If you are installing knobs, be sure to choose knobs that are the appropriate size for your cabinet doors. Knobs that are too large or too small will look out of place.
If you are installing handles, be sure to choose handles that are the appropriate length for your cabinet doors. Handles that are too short or too long will look awkward.
When you are drilling pilot holes, be sure to use a drill bit that is slightly smaller than the diameter of the screws that you will be using. This will help to prevent the screws from splitting the wood.
Be sure to tighten the screws securely, but do not overtighten them. Overtightening the screws can damage the cabinet doors.