How To Fit Kitchen Cupboard Handles

February 4, 2023
By admin
Filed Under Kitchen Cabinets
No Comments

How To Fit Kitchen Cupboard Handles

When it comes to giving your kitchen a fresh new look, replacing the cupboard handles is a quick and easy way to make a big impact. And while it may seem like a daunting task, it's actually quite simple to do yourself with just a few basic tools. Here's a step-by-step guide on how to fit kitchen cupboard handles like a pro:

Tools You'll Need:

Screwdriver (Phillips or flathead, depending on the type of screws)
Measuring tape
Pencil or marking tool
Level (optional, but recommended)
Drill (only if you need to create new holes)
Drill bit (only if you need to create new holes)

Step 1: Remove the Old Handles

Start by removing the old handles. Most handles are simply screwed on, so you should be able to unscrew them with a screwdriver. If the handles are stuck, you may need to use a little bit of force, but be careful not to damage the cupboard door. Once the old handles are removed, set them aside.

Step 2: Measure and Mark the New Handle Positions

Next, you need to measure and mark the positions for the new handles. The standard distance between handles is 96mm, but you may want to adjust this depending on the size of your cupboard doors. To mark the positions, measure the distance from the top and bottom of the door to the center of where you want the handle to be. Then, use a pencil or marking tool to mark the spot.

Step 3: Create New Holes (If Necessary)

If the new handles require different hole placements than the old ones, you will need to create new holes. To do this, use a drill with a drill bit that is the same size as the screws that came with the handles. Drill the holes carefully, making sure to keep them straight.

Step 4: Fit the New Handles

Now it's time to fit the new handles. Take one of the handles and insert the screws into the holes. Tighten the screws until the handle is secure, but be careful not to overtighten them. Repeat this process for the remaining handles.

Step 5: Check and Adjust (Optional)

Once all the handles are fitted, step back and take a look at your work. If any of the handles are crooked, use a level to check and adjust them accordingly. You may also want to tighten or loosen the screws to get the perfect fit.

Tips:

If you're not sure how to measure and mark the handle positions, you can use a template that came with the handles or create your own by tracing the outline of the old handles onto a piece of paper.
When drilling new holes, start with a small drill bit and gradually increase the size until it's the same size as the screws.
If the screws are too long, they may protrude through the back of the cupboard door. To avoid this, cut the screws to the appropriate length before fitting the handles.
Once the handles are fitted, check to make sure they are all tightened securely.

Conclusion:

Fitting kitchen cupboard handles is a simple and straightforward task that can make a big difference in the look of your kitchen. By following these steps, you can easily give your cupboards a fresh new look without having to spend a lot of time or money.