Cutting Kitchen Cabinets To Fit Microwave

April 7, 2021
By admin
Filed Under Kitchen Cabinets
No Comments

Cutting Kitchen Cabinets To Fit Microwave

If you're looking to upgrade your kitchen with a new microwave, you may find that it doesn't fit into the existing cabinet space. In this case, you'll need to cut the cabinets to make room for the new appliance. While this may seem like a daunting task, it's actually quite simple with the right tools and materials.

Tools and Materials

Before you start cutting, gather the following tools and materials:

* Jigsaw or circular saw * Measuring tape * Pencil * Safety glasses * Dust mask * Clamps * Wood filler * Sandpaper

Step 1: Measure and Mark

First, you'll need to measure the space where you want to install the microwave. Use a measuring tape to determine the height, width, and depth of the opening. Then, transfer these measurements to the cabinet using a pencil.

Step 2: Create a Template

To ensure a precise cut, it's helpful to create a template. Cut a piece of cardboard to the exact dimensions of the microwave opening. Transfer the template to the cabinet and secure it with clamps.

Step 3: Cut the Cabinets

Now, it's time to cut the cabinets. Wear safety glasses and a dust mask for protection. Use a jigsaw or circular saw to cut along the template lines. Be sure to cut slowly and carefully to avoid mistakes.

Step 4: Remove the Cutout

Once the cabinets are cut, remove the cutout piece. Use a chisel or pry bar to gently pry it out. You may need to use a hammer to tap the chisel if it's stuck.

Step 5: Sand and Finish

Sand the edges of the opening to smooth any rough spots. Apply wood filler to any gaps or imperfections. Allow the wood filler to dry, then sand again until the surface is flush. Finally, touch up the finish to match the rest of the cabinets.

Tips for Cutting Kitchen Cabinets

Here are a few tips to help you cut kitchen cabinets safely and effectively:

* Use a sharp saw blade to ensure a clean cut. * Clamp the template securely to prevent it from moving while you cut. * Cut slowly and carefully to avoid mistakes. * Wear safety glasses and a dust mask for protection. * Be patient and take your time.