Installing Crown Molding On Kitchen Cabinets

December 20, 2017
By admin
Filed Under Kitchen Cabinets
No Comments

Installing Crown Molding on Kitchen Cabinets: An Essential Guide

Crown molding is a sophisticated and decorative element that can elevate the appearance of your kitchen cabinets. Installing it yourself is a manageable project that adds a touch of elegance and enhances the overall aesthetics of your kitchen.

To ensure a successful installation, consider the following essential aspects:

1. Measure and Cut the Molding:

Measure the length of each cabinet where you want to install the molding. Transfer the measurements to the molding and cut it using a miter saw to create a 45-degree angle at each end. Use a coping saw or power miter box for precise cuts.

2. Prepare the Cabinet Tops:

Clean the cabinet tops thoroughly to remove any dust or debris. Apply a thin layer of wood filler to any gaps or holes. Use a sanding sponge to smooth the surface after the filler dries.

3. Install the Crown Molding:

Apply a strip of construction adhesive to the underside of the molding. Carefully place the molding on the cabinet top, aligning the mitered angles. Use a nail gun to secure the molding with 16-gauge brad nails. Space the nails every 4 to 6 inches.

4. Fill Nail Holes and Paint:

Once the molding is installed, fill the nail holes with a paintable wood filler. Allow it to dry and sand it flush with the surface. Prime the molding and paint it to match the color of your cabinets or ceiling.

5. Add Detailing:

For a more decorative touch, you can add molding details such as rosettes, dentil molding, or egg and dart molding. These can be fastened using adhesive or small finishing nails.

By following these essential steps, you can successfully install crown molding on your kitchen cabinets, enhancing their appearance and adding a timeless element to your kitchen.