How To Trim Kitchen Cabinets Fit Refrigerator

June 16, 2018
By admin
Filed Under Kitchen Cabinets
No Comments

How to Trim Kitchen Cabinets to Fit Refrigerator

Fitting a new refrigerator into your kitchen can sometimes be challenging, especially if the opening in your cabinets is too small. Trimming the cabinets to fit the refrigerator is a task that can be done with the right tools and a little bit of patience. Here are the essential steps for trimming kitchen cabinets to fit a refrigerator:

Step 1: Gather Your Tools and Materials

Before you begin, gather the necessary tools and materials: a circular saw, a jigsaw, a drill, a tape measure, a pencil, a level, and safety glasses. You may also need shims or a filler strip, depending on the size of the opening.

Step 2: Measure and Mark the Cut Line

Use a tape measure to determine how much of the cabinet needs to be trimmed. Mark the cut line on the cabinet using a pencil and a level. Make sure the line is straight and parallel to the floor.

Step 3: Cut the Cabinet Frame

Use a circular saw to cut the cabinet frame along the marked line. Hold the saw firmly and keep it level. If you need to make a curved cut, use a jigsaw instead.

Step 4: Cut the Cabinet Door

Depending on the design of your cabinets, you may need to trim the cabinet door as well. Measure and mark the cut line on the door, then use a circular saw or a jigsaw to make the cut.

Step 5: Install the Refrigerator

Once the cabinets are trimmed, you can install the refrigerator. Use shims or a filler strip if needed to ensure a snug fit. Secure the refrigerator to the floor to prevent it from moving.

Step 6: Finish the Trim

If there are any exposed edges, you can finish them with molding or a decorative trim piece. This will give your cabinets a finished look and hide any imperfections.

Tips:

* Always wear safety glasses when using power tools. * Measure carefully and double-check your measurements before making any cuts. * Use a sharp saw blade for clean cuts. * If you are not comfortable trimming the cabinets yourself, consult a professional carpenter.