How To Strip Kitchen Cabinets

October 2, 2017
By admin
Filed Under Kitchen Cabinets
No Comments

How To Strip Kitchen Cabinets

Stripping kitchen cabinets can be a daunting task, but it is definitely possible to do it yourself with a little patience and elbow grease. Here are the essential steps you need to follow:

1. Safety First

Before you start, be sure to wear a dust mask and gloves to protect yourself from the fumes and chemicals. Open windows and doors to ventilate the area well.

2. Remove the Doors and Hardware

Take off the cabinet doors and remove all the hardware, such as hinges, handles, and knobs. Label the doors and hardware so you can easily put them back in place later.

3. Apply Stripper

Use a chemical stripper specifically designed for kitchen cabinets. Apply the stripper liberally to the cabinets using a brush or roller. Let the stripper sit for the amount of time specified on the product label.

4. Scrape Off the Finish

Once the stripper has had time to work, use a putty knife or scraper to remove the softened finish. Be careful not to damage the wood underneath.

5. Rinse and Neutralize

Rinse the cabinets thoroughly with water to remove any remaining stripper. Then, neutralize the stripper with a vinegar solution (1 cup vinegar to 1 gallon water). Rinse the cabinets again with water.

6. Sand the Cabinets

Once the cabinets are dry, sand them lightly with a fine-grit sandpaper to smooth out any rough spots. Wipe off the dust with a tack cloth.

7. Apply a New Finish

Now you can apply a new finish to your cabinets, such as paint, stain, or a clear sealer. Be sure to follow the manufacturer's instructions for application and drying time.

Tips:

Test the stripper in an inconspicuous area first to make sure it does not damage the wood.
Use a respirator if the stripper fumes are strong.
Be patient and take your time. Stripping kitchen cabinets can be a time-consuming process, but it is worth it in the end.