How To Raise Kitchen Cabinets Off The Floor

January 26, 2022
By admin
Filed Under Kitchen Cabinets
No Comments

How to Raise Kitchen Cabinets Off the Floor: A Step-by-Step Guide

Raising kitchen cabinets off the floor can completely transform the look and feel of your kitchen. However, be aware that this is a challenging project that requires certain skills and tools. If you are not confident in your DIY abilities, it's best to hire a professional. But if you're up for the task, here's a step-by-step guide on how to raise kitchen cabinets off the floor:

1. Gather Your Tools and Materials

You will need the following tools:

Drill
Screwdriver
Level
Tape measure
Pencil
Clamps

And the following materials:

1x4 lumber (for spacers)
Wood screws
Countersink drill bit

2. Determine the Height You Want

Decide how high you want to raise your cabinets. The standard height for kitchen cabinets is 36 inches, but you can raise them to any height that fits your needs. Once you have decided on a height, mark it on the wall with a pencil.

3. Cut the Spacers

Cut the 1x4 lumber into spacers that are the same height as the difference between the current height of your cabinets and the desired height. For example, if you want to raise your cabinets by 2 inches, you would cut the spacers to 2 inches high.

4. Attach the Spacers

Attach the spacers to the bottom of the cabinets using wood screws. Make sure the spacers are level and securely attached. Use clamps to hold the spacers in place while you drill the screws.

5. Remove the Toe Kick

The toe kick is the piece of trim that covers the bottom of the cabinets. Remove the toe kick so you can access the legs of the cabinets.

6. Cut the Legs

Cut the legs of the cabinets to the same height as the spacers. Use a saw to make the cuts. Be careful not to cut the legs too short.

7. Reattach the Toe Kick

Reattach the toe kick to the bottom of the cabinets. Make sure the toe kick is level and securely attached. Use screws to reattach the toe kick.

8. Check the Level

Use a level to check the level of the cabinets. Make any necessary adjustments until the cabinets are level. Tighten the screws to secure the cabinets in place.