How To Measure And Cut Crown Molding For Kitchen Cabinets

May 16, 2019
By admin
Filed Under Kitchen Cabinets
No Comments

How to Measure and Cut Crown Molding for Kitchen Cabinets

Crown molding adds a touch of elegance and sophistication to kitchen cabinets, but cutting and installing it can be a challenging task. Here's a step-by-step guide to ensure accurate measurements and precise cuts:

Measuring for Crown Molding:

1. Measure the length of the cabinet's top edge where the crown molding will be installed. 2. Add 2 inches to the measurement for overlap at each corner. 3. For example, if the cabinet's top edge is 100 inches long, cut the crown molding to 104 inches.

Cutting Crown Molding:

1. Use a miter saw or a chop saw for precise cuts. 2. Set the saw's miter angle to 45 degrees for outside corners and 30 degrees for inside corners. 3. For outside corners, place the crown molding upside down on the saw table, with the wide side facing you and the narrow side against the fence. 4. For inside corners, place the crown molding right side up on the saw table, with the wide side against the fence.

Attaching Crown Molding:

1. Apply a thin bead of construction adhesive to the back of the crown molding. 2. Align the crown molding with the top edge of the cabinet and press it firmly into place. 3. Use finishing nails or brad nails to secure the crown molding to the cabinet. 4. Space the nails 12-18 inches apart for a secure hold.

Tips:

1. Use a scrap piece of crown molding to practice cuts and ensure the saw is set correctly. 2. Measure the cabinet's top edge at multiple points to ensure it's level and even. 3. Use a level to check the crown molding's alignment as you install it. 4. Fill any gaps between the crown molding and the cabinet with caulk.

Conclusion:

By following these steps, you can accurately measure, cut, and install crown molding for kitchen cabinets, adding a touch of elegance and sophistication to your kitchen's design.