How To Level Kitchen Cabinets Doors

December 5, 2019
By admin
Filed Under Kitchen Cabinets
No Comments

How To Level Kitchen Cabinets Doors

Uneven kitchen cabinet doors can be an eyesore and make it difficult to open and close them properly. Leveling kitchen cabinet doors is a relatively easy task that can be done with a few simple tools. Here are the steps on how to level kitchen cabinet doors:

1. Gather Your Tools

You will need the following tools to level kitchen cabinet doors:

A level
A screwdriver
A hammer
Shims
A measuring tape
A pencil

2. Inspect the Cabinet Doors

Before you begin leveling the cabinet doors, inspect them for any damage. If the doors are warped or damaged, you will need to replace them before you can level them.

3. Measure the Cabinet Doors

Use a measuring tape to measure the height of the cabinet doors. The doors should be the same height from the top of the cabinet to the bottom.

4. Adjust the Hinges

To level the cabinet doors, you will need to adjust the hinges. There are two types of hinges that are commonly used on kitchen cabinets: face-frame hinges and inset hinges.

Face-frame hinges are mounted on the face of the cabinet door. To adjust the height of the door, use a screwdriver to loosen the screws that hold the hinge in place. Once the screws are loose, you can move the door up or down until it is level. Tighten the screws to secure the hinge in place.

Inset hinges are mounted inside the cabinet door. To adjust the height of the door, use a screwdriver to loosen the screws that hold the hinge in place. Once the screws are loose, you can move the door up or down until it is level. Tighten the screws to secure the hinge in place.

5. Use Shims

If the cabinet doors are still not level, you can use shims to level them. Shims are thin pieces of wood or plastic that can be inserted between the cabinet door and the hinge. To use a shim, place it between the door and the hinge and then tighten the screws that hold the hinge in place.

6. Check the Level

Once you have adjusted the hinges and used shims, use a level to check the level of the cabinet doors. If the doors are still not level, repeat steps 3-5 until the doors are level.

7. Tighten the Screws

Once the cabinet doors are level, tighten all of the screws that hold the hinges in place. This will ensure that the doors stay level.

By following these steps, you can easily level kitchen cabinet doors. Leveling kitchen cabinet doors can help to improve the appearance of your kitchen and make it easier to open and close the doors.