How To Install Kitchen Cabinet Knobs And Pulls

May 21, 2019
By admin
Filed Under Kitchen Cabinets
No Comments

How to Install Kitchen Cabinet Knobs and Pulls

Installing new cabinet knobs and pulls is a great way to update the look of your kitchen without breaking the bank. It's a relatively easy project that can be completed in a few hours with the right tools and materials. Here's a step-by-step guide on how to do it:

Step 1: Gather Your Materials and Tools

You will need the following supplies for this project:

New cabinet knobs or pulls
Drill
Screwdriver
Measuring tape or ruler
Pencil
Screws (if not included with the knobs or pulls)

Step 2: Measure and Mark the Knob or Pull Placement

The standard distance between the center of the knob or pull and the edge of the cabinet door is 3 inches. However, you can adjust this distance to suit your personal preferences.

To mark the placement, use a measuring tape or ruler to measure the desired distance from the edge of the cabinet door. Mark this spot with a pencil.

Step 3: Drill a Pilot Hole

Use a drill to create a pilot hole for the screw. The pilot hole should be slightly smaller than the screw. Be careful not to drill all the way through the cabinet door.

Step 4: Install the Knob or Pull

Place the knob or pull over the pilot hole and align it with the markings you made earlier. Insert the screw through the knob or pull and into the pilot hole. Tighten the screw using a screwdriver until the knob or pull is secure.

Step 5: Repeat for Remaining Knobs or Pulls

Repeat steps 2-4 for the remaining knobs or pulls.

Tips for Installing Cabinet Knobs and Pulls

If you are installing new knobs or pulls on existing cabinet doors, remove the old ones first.
Use a level to ensure that the knobs or pulls are installed evenly.
If you are installing pulls, make sure to center them on the cabinet door.
Tighten the screws securely, but do not overtighten or you could strip the wood.