How To Cut Crown Molding For Corner Kitchen Cabinet

January 12, 2021
By admin
Filed Under Kitchen Cabinets
No Comments

How to Cut Crown Molding for Corner Kitchen Cabinets

Crown molding is a decorative molding that is installed at the top of cabinets to add a touch of elegance and sophistication. It can be a great way to finish off a kitchen remodel or to update the look of your existing cabinets. However, cutting crown molding for corner kitchen cabinets can be a bit tricky. Here is a step-by-step guide on how to do it:

Step 1: Measure the length of the molding.

Use a measuring tape to determine the length of the molding needed for the corner. Add an additional 6 inches to the measurement to allow for overlap.

Step 2: Mark the length on the molding.

Use a pencil to mark the length of the molding on the back of the piece. Make sure to measure from the inside edge of the molding.

Step 3: Cut the molding.

Use a miter saw to cut the molding at a 45-degree angle. Make sure to hold the molding securely in place and to use a sharp blade.

Step 4: Dry fit the molding.

Place the molding in the corner and hold it in place. Make sure that the ends of the molding overlap by about 1 inch. Adjust the angle of the cuts as needed to ensure a snug fit.

Step 5: Apply adhesive.

Apply a thin bead of wood glue or construction adhesive to the inside edges of the molding. Press the molding into place and hold it for a few minutes to allow the adhesive to set.

Step 6: Nail the molding in place.

Use a brad nailer to nail the molding into place. Drive the nails through the face of the molding and into the studs behind the cabinets. Countersink the nails slightly below the surface of the molding.

Step 7: Fill the nail holes.

Fill the nail holes with wood filler. Allow the wood filler to dry and then sand it smooth.

Step 8: Paint or stain the molding.

Paint or stain the molding to match the cabinets. Allow the paint or stain to dry completely.

Installing crown molding on corner kitchen cabinets can be a challenging task, but it is definitely possible with a little patience and practice. By following these steps, you can achieve a professional-looking finish that will add beauty and value to your kitchen.