How Do You Install Kitchen Cabinet Hardware

September 27, 2018
By admin
Filed Under Kitchen Cabinets
No Comments

How Do You Install Kitchen Cabinet Hardware

Kitchen cabinet hardware is a great way to update the look of your kitchen without having to replace the cabinets themselves. It's a relatively easy project that can be completed in a few hours. Here are the steps on how to install kitchen cabinet hardware:

1. Gather your materials

You will need the following materials:

Cabinet hardware
Screwdriver
Drill (optional)
Measuring tape
Level
Pencil

2. Choose the location of the hardware

The location of the hardware will depend on the type of hardware you are installing. For example, knobs are typically installed in the center of the cabinet door, while pulls are installed on the top or bottom edge of the door.

Once you have chosen the location of the hardware, mark the spot with a pencil.

3. Drill pilot holes (optional)

If you are installing hardware that requires screws, you will need to drill pilot holes. This will help to prevent the wood from splitting when you insert the screws.

To drill pilot holes, use a drill bit that is slightly smaller than the diameter of the screws.

4. Install the hardware

Once you have drilled the pilot holes (if necessary), you can install the hardware.

To install the hardware, simply insert the screws into the pilot holes and tighten them with a screwdriver.

5. Level the hardware

Once the hardware is installed, use a level to make sure that it is level.

If the hardware is not level, loosen the screws and adjust the hardware until it is level.

6. Tighten the screws

Once the hardware is level, tighten the screws all the way.

7. Enjoy your new hardware!

Your new cabinet hardware is now installed and ready to use.

Here are some additional tips for installing cabinet hardware:

If you are not sure where to place the hardware, you can use a template to help you.
When drilling pilot holes, be careful not to drill too deep.
If you are installing hardware on a painted surface, be sure to use a drill bit that is designed for painted surfaces.
Once the hardware is installed, be sure to tighten the screws all the way to prevent them from coming loose.