Hanging Kitchen Wall Units On Plasterboard

June 28, 2019
By admin
Filed Under Kitchen Cabinets
No Comments

Hanging Kitchen Wall Units On Plasterboard: A Comprehensive Guide

Kitchen wall units are an essential part of any kitchen, providing both storage and style. If you're planning on installing wall units in your kitchen, it's important to do it properly to ensure they're both safe and secure. Here's a comprehensive guide on how to hang kitchen wall units on plasterboard:

1. Planning and Preparation

Before you start hanging your wall units, it's important to plan your layout and make sure you have all the necessary tools and materials. You'll need a drill, screws, plasterboard fixings, a level, a tape measure, and a pencil. Once you have everything you need, you can start marking out where you want your wall units to go.

2. Marking the Wall

Using a level and a tape measure, mark out the height and position of your wall units on the wall. Make sure the marks are level and that the units will be evenly spaced. Once you have marked out the positions of the units, you can start drilling pilot holes for the screws.

3. Drilling Pilot Holes

Use a drill to create pilot holes for the screws. The holes should be slightly smaller than the diameter of the screws. This will help to prevent the plasterboard from cracking when you screw in the units.

4. Installing the Plasterboard Fixings

Insert the plasterboard fixings into the pilot holes. These fixings will help to spread the load of the wall units and prevent them from pulling out of the wall. Tighten the fixings until they are snug, but do not overtighten them.

5. Hanging the Wall Units

Now you can start hanging the wall units. Lift the first unit into place and align it with the marks on the wall. Secure the unit to the wall using the screws. Repeat this process for the remaining wall units.

6. Leveling the Wall Units

Once all the wall units are in place, use a level to check that they are level. If any of the units are not level, you can adjust them by loosening the screws and moving the unit until it is level. Once the units are level, tighten the screws to secure them.

7. Finishing Touches

Once the wall units are hung and level, you can add any finishing touches, such as handles or doors. You can also install a splashback behind the wall units to protect the wall from water damage.

Tips for Hanging Wall Units on Plasterboard

Here are a few tips to help you hang your wall units safely and securely:

Use strong plasterboard fixings. This will help to prevent the units from pulling out of the wall.
Drill pilot holes for the screws. This will help to prevent the plasterboard from cracking.
Level the wall units once they are in place. This will ensure that they are both safe and aesthetically pleasing.