Build A Kitchen Cabinet Base

May 24, 2018
By admin
Filed Under Kitchen Cabinets
No Comments

Building a Kitchen Cabinet Base: A Step-by-Step Guide

Building a kitchen cabinet base is a relatively simple task that can be completed in a few hours with the right tools and materials. By following these steps, you can create a sturdy and functional base for your new cabinets.

Materials:

3/4-inch plywood
1x4 pine boards
1x2 pine boards
Wood glue
1 1/4-inch brad nails
2-inch wood screws

Tools:

Circular saw
Table saw
Miter saw
Drill
Nail gun
Measuring tape
Level

Instructions:

Cut the side panels. The side panels of the cabinet base will be made from 3/4-inch plywood. Cut two pieces to the desired height of the base, and then cut two pieces to the desired width.
Assemble the side panels. Apply wood glue to the edges of the side panels, and then brad nail them together. Be sure to square up the panels as you assemble them.
Cut the front and back panels. The front and back panels of the cabinet base will be made from 1x4 pine boards. Cut two pieces to the desired width of the base, and then cut two pieces to the desired height.
Assemble the front and back panels. Apply wood glue to the edges of the front and back panels, and then brad nail them together. Be sure to square up the panels as you assemble them.
Attach the front and back panels to the side panels. Apply wood glue to the top and bottom edges of the front and back panels, and then brad nail them to the side panels. Be sure to square up the panels as you attach them.
Cut the bottom shelf. The bottom shelf of the cabinet base will be made from 3/4-inch plywood. Cut a piece to the desired width and depth of the base.
Attach the bottom shelf to the side panels. Apply wood glue to the bottom edges of the side panels, and then brad nail the bottom shelf in place. Be sure to square up the shelf as you attach it.
Cut the top frame. The top frame of the cabinet base will be made from 1x2 pine boards. Cut four pieces to the desired width of the base, and then cut four pieces to the desired depth.
Assemble the top frame. Apply wood glue to the edges of the top frame pieces, and then brad nail them together. Be sure to square up the frame as you assemble it.
Attach the top frame to the cabinet base. Apply wood glue to the top edges of the cabinet base, and then brad nail the top frame in place. Be sure to square up the frame as you attach it.

Congratulations! You have now successfully built a kitchen cabinet base. By following these steps, you can create a sturdy and functional base for your new cabinets.